PayComplete™™ Help Center

M

MACHINE_RECOUNT

Permission to make a full recount of the machine contents.

—

MACHINE_RECOUNT_FOUR_EYES

Requires a second user with this permission to perform the machine recount operation.

Requires the MACHINE_RECOUNT permission.

—

MACHINE_TEST

Permission to access the machine test menu.

Administrator, SDS_Administrator, CDS-820j_Administrator

MACHINE_TOTAL_PER_BOX

Permission to make a printout of the machine contents per box. Note! Enabled by the combination of the MACHINE_TOTAL_PER_BOX and PRINT_MACHINE_TOTAL permissions.

—

MACHINE_TOTAL_PER_BOX_LIMITED( true )

Permission to limit the MACHINE_TOTAL_PER_BOX to the specified box. Lists the specified boxes on MachineTotal receipts.

For example: MACHINE_TOTAL_PER_BOX_LIMITED:AB0MACHINE_TOTAL_PER_BOX_LIMITED( true ) REVISION SET_TIME_DELAY_LOCK

machine—

MACHINE_TOTAL_PER_TYPE

Adds a total per type of money for example, dispensable, not dispensable) to the machine total receipt.

Available from Connect on-Device version 2.17.6.

—

MAINTENANCE

Enables maintenance tasks from the service terminal. Depends on the Service mode permission.

Administrator, Maintenance, SDS_Administrator, CDS-820j_Administrator

MANUAL_REFILL

Needed to replenish coins by filling the hoppers manually.

Administrator, CIT2

MANUAL_REFILL_SCAN

Prompts the user to provide a scanned barcode during manual refill operations. The user can scan or enter the barcode manually before filling the hoppers manually.

Requires the MANUAL_REFILL permission.

—

MANUAL_REFILL_VALUE_INPUT

Permission to input/display amounts instead of quantities in manual refill.

—

MENU_LAYOUT( true, true )

Permission to use an alternate number of rows/cols specified by addition in the select service menu.

—

MOVE_COINS_TO_LEVEL

Permission to move coins from the coin dispensers to the low target level to the transport box. All coins above the set low level in the coin dispensers are moved to the transport box. Also, permission to empty the transport box.

Administrator, CIT

MOVE_COINS_TO_TARGET_LEVEL

Permission to move coins to overflow until the defined target level is reached. Define the target level in the Devices.properties file.

—

MOVE_NOTES

Permission to move notes from recycling boxes to transport boxes (or acceptance boxes).

Note:

Only for note recyclers.

Administrator

MOVE_NOTES_ALLOW_EDIT

Permission to edit the mixes that describe what should be remaining after the move, before the move starts.

Note:

This permission requires the MOVE_NOTES permission.

Administrator

MOVE_NOTES_ALLOW_EDIT_NON_BUNDLES

Permission to edit non-bundle-sized moves.

—

MOVE_NOTES_ALLOW_EMPTYING

Permission to empty the transport box/acceptance box during the move notes operation, in case it gets full. Without this permission, it will stop once the transport box is full. This permission requires the MOVE_NOTES permission.

—

MOVE_NOTES_ALWAYS_EMPTY

The move notes flow always ends with the emptying of the transport box (or acceptance box). The move notes flow does both the move notes and the empty note boxes.

Note:

Requires both MOVE_NOTES and MOVE_NOTES_ALLOW_EMPTYING (but it does not require EMPTY_NOTE_BOXES).

—

MOVE_NOTES_LIMIT_CURRENCIES

Limits the currencies that can be moved in MOVE_NOTES.

—

MOVE_NOTES_NUMERIC_KEYPAD

Permission to use a numeric keypad instead of preset values in MOVE_NOTES.

—

MOVE_NOTES_VALUE_INPUT

Permission to input/display amounts instead of quantities in move notes. Note:

This permission requires the MOVE_NOTES_NUMERIC_KEYPAD permission

—

MULTIPRO_ACCOUNTING

Permission to access the accounting menu for the car wash payment terminals (CarWash Pro).

This permission has functions to get accounting information and to see/redeem overpayments.

—

MULTIPRO_ADVANCED_SETUP

Permission for miscellaneous configurations for the car wash payment terminals (CarWash Pro).

—

MULTIPRO_COMPONENT_SETUP

Permission to do hardware setup and configuration for the car wash payment terminals (CarWash Pro).

—

MULTIPRO_FREE_RECEIPT

Permission to print a receipt with a refund amount on the car wash payment terminals (CarWash Pro).

—

MULTIPRO_FREE_TOKENS

Permission to dispense free tokens on the car wash payment terminals (CarWash Pro).

—

MULTIPRO_MACHINE_SETUP

Permission to configure the user flows and available purchases/prices for the car wash payment terminals (CarWash Pro).

—

MULTIPRO_MANUAL_WASH

Permission to start a manual (free) car wash on the car wash payment terminals (CarWash Pro).

—

MULTIPRO_POSOPERATIONS

Permission to see and list POS operations for the car wash payment terminals (CarWash Pro).

—

MULTIPRO_VARIOUS_SETUP

Permission for miscellaneous configurations for the car wash payment terminals (CarWash Pro)

—

N

NO_DISPENSE

Disables the dispense function.

—

NO_RECEIPT

Do not give the users any receipts.

—

NOTE_RECOUNT

Permission to do a note recount of the machine content.

—

NOTE_RECOUNT_FOUR_EYES

Prompts another user with permission to sign in and perform the operation.

Requires the NOTE_RECOUNT permission.

—

O

OPEN_SERVICE_DOOR:

Permission to open service doors with electric locks. The options are:

Administrator

OPERATOR_VIEW

Permission to open and log in to the operators/administrators view.

Administrator, SDS_Administrator, CDS-820j_Administrator

OPTIONAL_RECEIPTS

For every receipt, it first shows the receipt on the screen and asks if the receipt should be printed or not.

Available from Connect on-Device version 3.8.0.

OUT_OF_USE_OPERATION

Allows the user to log in to the normal select service menu as long as there are no fatal errors, even if the machine is out of use.

SDS_Administrator, SDS_CIT, CDS-820j_Administrator, CDS-820j_Cashier

P

PACKAGE_ROLLBACK

Permission to roll back the latest package sent from Connect.

—

PARALLEL_BAG_DROP_NO_DUP_CHECK

Permission to drop the same bag in multiple deposit sessions during parallel bag drop.

Requires the PARALLEL_BAG_DROP_ZERO_AMOUNT permission.

For example, used at a store where customers scan their cards during deposit to identify themselves.

—

PARALLEL_BAG_DROP_ZERO_AMOUNT

Enables barcode scanning for bag drop during normal deposit. The values of the bags will not be recorded.

—

PRINT_DAILY_OPERATIONS

Permission to print all transactions for the day.

Administrator, SDS_Administrator, CDS-820j_Administrator

PRINT_FINAL

Permission to print a receipt with all transactions for the day. All transactions that have occurred since the last receipt was printed are included.

Cashier

PRINT_MACHINE_TOTAL

Permission to print a receipt for the machine's contents.

Administrator, CIT, SDS_Administrator, SDS_CIT, CDS-820j_Administrator

PRINT_OWN_TRANSACTION_HISTORY

Permission to print own transactions.

—

PRINT_RECEIPT_HISTORY

Permission to print old receipts.

Administrator, SDS_Administrator, CDS-820j_Administrator

PRINT_TRANSACTION_HISTORY

Permission to print the daily transactions for any date.

Administrator, SDS_Administrator, CDS-820j_Administrator

PRINT_USER_LIST

Permission to print the system user list.

Available from Connect on-Device version 2.13.0.

—

PRINT_USER_LIST_EXCLUDE_ROLE( true )

Permission to exclude users of a certain role from the user list.

—

PRINT_WORKUNIT_FINAL

Permission to select a work unit and print all transactions for the selected unit since the last printout.

—

PRINT_YESTERDAYS_OPERATIONS

Permission to print all transactions for yesterday.

—

PURGE_CIMA

Enables functionality to empty rolls, regardless of the registered count.

Administrator

PURGE_CIMA _FOUR _EYES

Enables secondary login to perform the function PURGE_CIMA.

—

PURGE_COINS

Permission to move all coins to the transport box and to empty the transport box.

Administrator

PURGE_COINS_FOUR_EYES

Prompts another user with permission to perform the purge coins operation.

Requires the PURGE_COINS permission.

Available from Connect on-Device version 3.16.0.

—

PURGE_COINS_TO_OUTLET

Permission to dispense all coins to the cash drawer/cups until the dispensers are empty.

Administrator

PURGE_NOTES_TO_BAG

Permission to move notes in a dispenser to overflow until the end-of-film is reached.

—

PURGE_NOTES_TO_BAG_FOUR_EYES

Prompts another user with permission to perform the purge notes to bag operation.

Requires the PURGE_NOTES_TO_BAG permission.

Available from Connect on-Device version 3.16.0.

—

R

REBOOT_COMPUTER

Permission to reboot the computer.

Available from Connect on-Device version 3.2.4.

SDS_Administrator

RECEIPTS_REQUEST_CONTINUE

Displays a Continue button for a second receipt.

Requires the CC_ALL_RECEIPTS or CC_BOX_RECEIPT permission to function as intended.

Available from Connect on-Device version 3.2.5.

—

RECEIPT_REQUEST_OPTIONAL

Allows the user to cancel printing the second receipt.

Requires the CC_ALL_RECEIPTS or CC_BOX_RECEIPT permissions and the RECEIPTS_REQUEST_CONTINUE permission to function as intended.

Available from Connect on-Device version 3.42.0.

—

RECEIPT_TOTAL_CUT

Makes the receipt printer perform a total cut instead of a partial cut for printed receipts. Note! This only applies to Custom TPL-80 and Custom Kube printers. Custom VKP-80 always performs a total cut since it has a presenter.

—

REFILL_MANUAL_DROP_BY_DENOMINATION

Enables a Manual drop button in the post-refill screen that launches bag drop by denominations. After the process has been completed, 2 messages are sent, one for a refill and one for a bag drop with claimed value.

Available in Connect on-Device version 3.36.0 and later.

—

REPLENISH

Permission to replenish certain devices, for example, REPLENISH_LIMITED: NMD.1, used for HCM and NMD units.

From Connect on-Device version 3.1.1, this permission was removed from the Administrator role.

CIT, CIT2

REPLENISH_LIMITED

Permission to replenish selective boxes, for example, {@code REPLENISH_SELECTIVE:*}.

—

REPLENISH_SCAN

Prompts the user to provide a barcode scan during the replenishment operation.

Requires the REPLENISH permission.

—

REPLENISH_SELECTIVE

Needed to replenish selective cash boxes instead of all at once.

Requires the REPLENISH permission.

—

REPLENISH_TIMELIMIT

Allows you to set a time range during which the user is allowed to replenish note boxes. The format is <HH>:<mm>-<HH>:<mm>.

Requires the REPLENISH permission.

Available from Connect on-Device version 3.15.0.

—

REPLENISH_VALUE_INPUT

Enters value instead of count in the replenish page.

Requires the REPLENISH permission.

—

REQUIRES_OTA_MFA

Enables multi-factor authentication using an OTA.

Users with this permission are asked for an additional OTA scan right after performing a standard authentication process.

—

RESOLVER_COIN_LOWER

Gives the user permission to use the specified resolver. Needed to resolve errors in the lower part of the coin unit.

Available from Connect on-Device version 2.8.8.1.

Administrator, CDS-820j_Administrator

RESOLVER_COIN_UPPER

Gives the user permission to use the specified resolver. Needed to resolve errors in the upper part of the coin unit.

Available from Connect on-Device version 2.8.8.1.

Administrator, CDS-820j_Administrator

RESOLVER_NOTE_LOWER

Gives the user permission to use the specified resolver. Needed to resolve errors in the lower part of the note unit.

Available from Connect on-Device version 2.8.8.1.

Administrator

RESOLVER_NOTE_UPPER

Gives the user permission to use the specified resolver. Needed to resolve errors in the upper part of the note unit.

Available from Connect on-Device version 2.8.8.1.

Administrator

RESOLVER_RECOUNT_ROLL_FOUR_EYES

Prompts another user with this permission to perform the operation.

—

RETURN_ESCROW_TIMEOUT

Enables the return escrow process to time out.

—

REVISION

Print (additional) receipts after emptying and refilling during EMPTY_REFILL operation.

Permission to make a full recount of the machine contents.

Empties coin rolls, dispensers, and transport boxes/overflows in an RCS before redepositing.

—

RFE_SLAVE_SETUP

Permission to search for and connect to slave devices on RFE products.

—

S

SERVICE_COUNTERS

Permission to view/reset service counters and to clean CAM, coin dispensers, coin diverter (RCS 400 2.0), and transport box.

—

SERVICE_MODE

Gives access to the service terminal.

Administrator, CIT, CIT2, Maintenance, SDS_Administrator, CDS-820j_Administrator

SET_DEPOSIT_ACCOUNTING_DATE

Permission to set the accounting date for a single deposit.

—

SET_DISPENSE_ACCOUNTING_DATE

Permission to set the accounting date for a single dispense.

—

SET_GLOBAL_ACCOUNTING_DATE

Permission to set the accounting date for the machine until the expiration time/date. The settings affect all users and have an end date.

—

SET_OUT_OF_USE

Permission to set Connect on-Device Out Of Use.

Available from Connect on-Device version 3.2.2.

—

SET_SESSION_ACCOUNTING_DATE

Permission to set the accounting date for the session. The session accounting date expires at logout.

—

SET_SYSTEM_TIME

Permission to change system time. Currently only supported on machines running Linux, for example, CDS-820j.

SDS_Administrator

SET_TIME_DELAY_LOCK

Permission to set a time delay lock on doors.

Makes it possible to configure the time delay before a door can be unlocked and for how long the door remains unlocked.

—

SHOW_BALANCE_ON_PRINT

Enables printing the user balance on receipts.

Requires the SHOW_USER_BALANCE permission to work.

—

SHOW_CONTAINER_IDS_ON_PRINT

Enables printing of affected container IDs on deposit receipts.

—

SHOW_DEPOSIT_BALANCE

Enables additional info in the deposit screen, showing the current balance. Has no effect unless the user has SHOW_USER_BALANCE permission.

—

SHOW_USER_BALANCE

Enables a screen showing the current balance and an optional list of recent transactions during login.

Addition: Maximum number of recent transactions to include (0..n)

Note!

This permission is currently only supported in TransportConnect.

—

SHUT_DOWN_PROGRAM

Permission to shut down the program from the Operator Menu.

Administrator, CDS-820j_Administrator

SHUTDOWN_COMPUTER

Permission to shut down the computer.

Available from Connect on-Device version 3.2.4.

SDS_Administrator

SMART_VAULT_DEPOSIT

Makes it possible to register deposits of cash into a smart vault (dumb safe).

—

SMART_VAULT_DEPOSIT_CUSTOM_DATA

Makes it possible to register deposits of cash into a smart vault (dumb safe) with the addition of custom data entry before making the deposit.

—

SMART_VAULT_DEPOSIT_MIX_ALL(SMART_VAULT_DEPOSIT_MIX + "*")

Adds the option of selecting a dispense mix in the smart vault deposit flow. Enables all available mixes. Requires that you have either SMART_VAULT_DEPOSIT or SMART_VAULT_DEPOSIT_CUSTOM_DATA as well.

Note:

—

SMART_VAULT_DEPOSIT_MIX("SMART_VAULT_DEPOSIT_MIX:", true)

Adds the option of selecting a dispense mix in the smart vault deposit flow. Add one permission per mix you want to dispense. Requires that you have either SMART_VAULT_DEPOSIT or SMART_VAULT_DEPOSIT_CUSTOM_DATA permission as well.

Note:

—

SMART_VAULT_QR

Enables the possibility to scan a QR code with the amount in the smart vault flows.

—

SMART_VAULT_TRANSFER_REFILL_CUSTOM_DATA

Allows the user to transfer money from VaultConnect to refill RCS (only possible when VaultConnect is running on the computer controlling the RCS) with the addition of custom data entry before making the transfer.

—

SMART_VAULT_TRANSFER_REFILL

Makes it possible to transfer money from VaultConnect to refill RCS. This is only possible when you have VaultConnect running on the computer controlling the RCS.

—

SMART_VAULT_WITHDRAWAL_CUSTOM_DATA

Makes it possible to register withdrawals of cash from a smart vault (dumb safe) with the addition of custom data entry before making the withdrawal.

—

SMART_VAULT_WITHDRAWAL_MIX_ALL(SMART_VAULT_WITHDRAWAL_MIX + "*")

Adds the option of selecting a dispense mix in the smart vault withdrawal flow. This enables all available mixes. Requires that you have either SMART_VAULT_WITHDRAWAL or SMART_VAULT_WITHDRAWAL_CUSTOM_DATA as well.

Note:

—

SMART_VAULT_WITHDRAWAL_MIX("SMART_VAULT_WITHDRAWAL_MIX:", true)

Adds the option of selecting a dispense mix in the smart vault withdrawal flow. Add one permission per mix you want to dispense. Requires that you have either SMART_VAULT_WITHDRAWAL or SMART_VAULT_WITHDRAWAL_CUSTOM_DATA as well.

Note:

—

SMART_VAULT_WITHDRAWAL

Makes it possible to register withdrawals of cash from a smart vault (dumb safe).

—

STAY

Permission to return to the service selection after each operation.

Administrator, SDS_Administrator, CDS-820j_Administrator

T

TEST_SWITCHES

Permission to view the status of doors/switches in operator view.

Administrator, Maintenance, SDS_Administrator, CDS-820j_Administrator

THEME( true, true )

Permission to use the theme specified by addition.

—

TOOLBOX("TOOLBOX:", true ):

Permission to use the toolbox in the operator view. Permissions for the following actions are available:

For more information, see:

Administrator, SDS_Administrator (EJECT_CARD, OPEN_CLOSE_SHUTTER, OPEN_SAFE_DOOR, RESET), CDS-820j_Administrator (EJECT_CARD, CLOSE_SHUTTER, RESET)

TRANSACTION_INFO

Permission to include arbitrary information fields/tags from addition, such as 'pickup' or 'audit', in the transaction(s) performed by a user. 1..n

—

TRANSPORT_UNIT_PICKUP

Permission to do pickup from SPS 700 using the transport unit.

—

TRANSPORT_UNIT_PICKUP_FOR_REPLENISH

Permission to do pickup from SPS 700 using the transport unit to replenish the other units, that is, BNR.

—

TRANSPORT_UNIT_REPLENISH

Permission to load notes into SPS 700 from the transport unit.

—

U

UNBLOCK_USERS

Permission to unblock deactivated users.

—

USB_PROTECTION_EDIT

Enables the USB protection button in the Operator menu.

—

USB_PROTECTION_TEMP_OFF

Enables a button allowing a user to disable USB protection temporarily. The user can check the status, but can't disable/enable the protection.

—

USER_ALLOCATION

Similar to WORK_UNIT_ALLOCATION, that is, the user must select an allocation when logging in, unless already allocated. See the lane allocation feature for details.

Don't combine this permission with WORK_UNIT_ALLOCATION. It may cause unpredictable behavior.

Available from Connect on-Device version 3.14.0.

—

USER_ALLOCATION_DEPOSIT

Allows the user to make deposits even if the user has not been allocated. A supervisor needs to be able to make a deposit regardless of the allocation state.

Corresponds with WORK_UNIT_ALLOCATION_DEPOSIT.

Available from Connect on-Device version 3.14.0.

—

V

VIEW_MACHINE_TOTAL

Permission to view the machine total on screen.

Requires the PRINT_MACHINE_TOTAL permission.

Available from Connect on-Device version 3.2.0.

SDS_Administrator, SDS_CIT

VIEW_RECENT_TRANSACTIONS

Gives the signed-in user permission to view their recent transactions.

—

VIEW_USER_BALANCE

Gives the signed-in user permission to view their current user balance.

—

VU_PURCHASE

Enables the purchase screen

Requires the SHOW_USER_BALANCE permission.

—

VU_REFILL

Enables the refill screen and the control of the machine. Requires the Admin role

—

VU_SHOW_BALANCE

Allows the user to see their balance on the receipts.

Requires the SHOW_USER_BALANCE permission to make a purchase. Otherwise, the machine has no idea how much money the user has.

Note! Replaced with SHOW_USER_BALANCE_ON_PRINT from CoD version 3.37.0

—

W

WORK_UNIT

Permission to dispense a specific money mix by entering, for example, a flight number or a group name. Requires the user to enter the work unit, for example, flight number, department, before dispensing is allowed. Information about the work unit is printed on the receipt and is stored in the database. The work units are defined in the file workunits.xml. In this file, you can set work units for specific roles.

For more information, see Adding a work unit.

Available from Connect on-Device version 3.11.0.

—

WORK_UNIT_ALLOCATION

The permission must be used in combination with the WORK_UNIT permission.

Required on the user role to activate the lane allocation feature. Forces the user to select an allocation when logging in. If the user already has allocated a lane (work unit), no additional allocation is required.

Don't combine with USER_ALLOCATION.

Available from Connect on-Device version 3.13.0.

—

WORK_UNIT_ALLOCATION_DEPOSIT

Allows the user to make deposits even if the work unit has not been allocated; that is, a supervisor should be able to make a deposit regardless of the work unit's allocation state.

—

WORK_UNIT_ALLOCATION_AUTO_SELECT_ALLOCATION

Automatically selects allocation if there is an allocation with the same ID as the work unit. Requires WORK_UNIT_ALLOCATION permission.

The screen where you select allocation isn't shown if the work unit name is identical to the allocation ID.

A user who selects a work unit <unit name="wu-123" /> is given an allocation <allocation id="wu-123" /> unless the work unit has already been allocated, that is, the work unit name corresponds to the expected allocation (ID).

Available from Connect on-Device version 3.15.5.

—

WORK_UNIT_BY_GROUP

Allows you to select a work unit group before selecting a unit, requires {@link #WORK_UNIT}

—

WORK_UNIT_DAY_TOTAL_ON_RECEIPTS

Adds the sum of the currently logged-in work unit to the deposit and dispense receipts.

Available from Connect on-Device version 3.9.0.

—

WORK_UNIT_DAY_TOTAL_USE_ACCOUNTING_DATE

Uses the accounting date and not the creation date when calculating the work unit day total.

Don't combine this permission with the WORK_UNIT_DAY_TOTAL_USE__SELECTED_ACCOUNTING_DATE permission.

Available from Connect on-Device version 3.9.2.

—

WORK_UNIT_DAY_TOTAL_USE_SELECTED_ACCOUNTING_DATE

Uses the selected accounting date instead of the current date when calculating the work unit day total.

This permission is an addition to WORK_UNIT_TOTAL_ON_RECEIPTS.

Don't combine this permission with the WORK_UNIT_DAY_TOTAL_USE_ACCOUNTING_DATE permission.

Available from Connect on-Device version 3.14.5.

—

WORK_UNIT_NO_CHECK

Permission to enter the work unit name without checking the file.

Available from Connect on-Device version 2.10.1.

—